repeat">
Mahesh Enterprises
Mahesh Enterprises
Masjid Bandar, Mumbai, Maharashtra
GST No. 27AFEPM7719R1ZM
08048968419 80% Response Rate
Send E-mail

fasteners

We have a wide range of products of sophisticated nature in all metals in exotic metals namely Titanium, Hastelloy (B & C) Nickel, Monel, Inconel, Alloy - 20, Alloy - 904L, SS 316-304-321-310, etc such as fastners, sleeve, nozzle, shaft, shaft sleeve, stud/ bolt/ nut, as per ASTM-A-193 GR.B7 and ASTM-A-194 GR.2H.
Request CallBack
Stainless Steel Fastener
Ask For Price

Stainless Steel Fastener

Product Price : Get Latest Price
Product Brochure
Product Details:
FinishMatt Polish, Hot Dip Galvanized
Head StyleHex Head
ShapeHexagonal
Packaging TypeBox
Thread TypeYes
MaterialStainless Steel
ColorSilver

Stainless Steel Fastener 304H has improved mach-inability characteristics. 304H also has excellent welding and deep drawing characteristics.


Specifications:

ASTM A182 TP304H, ASTM A213 TP304H, ASTM A240 TP304H, ASTM A249 TP304H, ASTM A276 TP304H, ASTM A312 and TP304H C (Carbon content).04 - .10MN2P0.04S0.03 Ni8.0-11.0Cr18.0 - 20.0Si1Mo Co Cu V (Vanadium content) Ti (Titanium content) Al (Aluminum content) Fe (Iron content) cb+Ta Zr (Zirconium content)


Additional Information:
  • Item Code: 304
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
Stainless Steel Fastener
Ask For Price

Stainless Steel Fastener

Product Price : Get Latest Price
Product Details:
Surface Finish Galvanized
TypeFastener
ConditionNew
FinishMatt Polish, Zinc Plated, Hot Dip Galvanized
Head StyleHex Head, T Head, Round Head
ShapeRound, Hexagonal
Packaging TypeBox
Type of boltsHeaded
MaterialStainless Steel
Stainless Steel Fastener 310 is a chromium-nickel steel with excellent oxidation resistance to carbonizing and reducing environments. Stainless 310 has excellent resistance to drawing and tempering salts, neutral salts, cyanide salts, and high-speed salts.

Specifications:
  • ASTM A167, ASTM A182, ASTM A213, ASTM A249 and ASTM A276

Additional Information:
  • Item Code: 310
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
Hastelloy Fasteners
Ask For Price

Hastelloy Fasteners

Product Price : Get Latest Price
Product Details:
TypeFastener
Thread TypeYes
ShapeRound
Surface Finish Cadmium Zinc Plated, Blackeing, Nickel Plated
Packaging TypeBox
MaterialStainless Steel
Hastelloy Fasteners C is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. Hastelloy C is used in pollution control, chemical processing, pulp and paper production and waste treatment. It is specified in sour gas applications and is commonly used in Flue Gas Desulfurization applications for scrubbers, dampers and ducts.

Specification:

Sheet/PlateASTM B575, ASTM B906,
Round Bar/WireASTM B574, ISO 9723. ISO 9724, DIN 17752. DIN 17753,
Pipe & TubeASTM B622, ASTM B619, ASTM B775, ASTM B516, ASTM B626, ISO 6207,
FittingsASTM B366, DIN 17744
ForgingsASTM B564,
Welding WireFiller Metal C276, AWS A5.14

Additional Information:
  • Item Code: C
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Hastelloy Fasteners
Ask For Price

Hastelloy Fasteners

Product Price : Get Latest Price
Product Details:
Surface Finish Galvanized
Finish Zinc Plated, Matt Polish, Hot Dip Galvanized
ShapeHexagonal
Head StyleHex Head
Packaging TypeBox
Type of boltsHeaded
Thread TypeYes
MaterialStainless Steel
Hastelloy Fasteners provides resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Inconel can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries. Hastelloy contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal-arc, and shielded metal-arc processes.

Specifictaion:
Sheet/PlateASTM B575, ISO 6208, DIN 17750
Round Bar/WireASTM B574, ISO 9723, ISO 9724, DIN 17752, DIN 17753
Pipe & TubeASTM B622, ASTM B619, ASTM B775, ASTM B516, ASTM B626, ASTM B751, ISO 6207, din 17751
FittingsASTM B366
ForgingsASTM B564, DIN 17754

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
SS.321 Nuts
Ask For Price

SS.321 Nuts

Product Price : Get Latest Price
Product Details:
Grade321, 321H, 304, 304L, 304H
Type of BoltsRound-head, Milled Head
MaterialSteel
ConditionNew
CustomisationYes
CustomizedYes
We are the leading Manufacturer of SS.321 NUTS. we do customized works for our client. kindly contact for more details.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
A193 GR.B7 Studs
Ask For Price

A193 GR.B7 Studs

Product Price : Get Latest Price
Product Details:
Minimum Order Quantity500 Piece
SizeCustomized
MaterialASTM/ASME,B7/,L7/L7M/B16/CLASS-8.8/NUT -GR.2H/2HM/7/7M
Usage/ApplicationIndustrial
Thread TypeYes
We are the leading Manufacturer of A193 GR.B7 STUDS. we do customized works for our client. kindly contact for more details.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
A-193 GR.B7 Bolt
Ask For Price

A-193 GR.B7 Bolt

Product Price : Get Latest Price
Product Details:
Product Type Nut, Threaded, Bolt
ConditionNew
Surface TreatmentBlack Oxide, Black, Plain
We are the leading Manufacturer of A-193 GR.B7 IN INDIA. we do customized works for our client. kindly contact for more details.

Additional Information:
  • Pay Mode Terms: T/T (Bank Transfer)
Yes! I am Interested
Request CallBack
Monel K500 Fasteners
Ask For Price

Monel K500 Fasteners

Product Price : Get Latest Price
Product Brochure
Product Details:
Material GradeMonel K500
Packing TypeBox
ColorSilver
MaterialStainless Steel
ApplicationMachinery

Mahesh Enterprises is India’s one of the leading Fasteners manufacturers & Suppliers in Monel K500. It is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K 500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K 500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

 

It is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside.


Corrosion Resistant Monel K 500 :

The corrosion resistance of alloy K 500 is substantially equivalent to that of alloy 400 except that when in the age hardened condition, nickel alloy K 500 has a greater tendency toward stress-corrosion cracking in some environments. Monel K 500 has been found to be resistant to a sour-gas environment. The combination of very low corrosion rates in high-velocity sear water and high strength make alloy K 500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.


Characteristics of Monel K500 :
  • Excellent resistance to high velocity sea water
  • Resistant to a sour-gas environment
  • Excellent mechanical properties from sub-zero temperatures up to about 480C
  • Non-magnetic alloy
  • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.

Application:

Sour-gas service applications

  • Oil and gas production safety lifts and valves
  • Oil-well tools and instruments like drill collars
  • Oil well industry
  • Doctor blades and scrapers
  • Chains, cables, springs, valve trim, fasteners for marine service
  • Pump shafts and impellers in marine service

Yes! I am Interested
Request CallBack
Inconel 600 Fasteners
Ask For Price

Inconel 600 Fasteners

Product Price : Get Latest Price
Product Details:
Minimum Order Quantity100 Piece
SizeAS PER CUSTOMERS REQUIREMENT
GradeINCONEL 600
TypeFastener
MaterialStainless Steel
Surface FinishFINE FINISH
Material GradeInconel 600
Packaging TypeBox

Mahesh Enterprises is India’s one of the leading Fasteners manufacturers & Suppliers in Inconel 600. It is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. It is designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weld ability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.

 

It is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside.


Characteristics:
  • Non-magnetic
  • Excellent mechanical properties
  • High strength and good weld ability under a wide range of temperatures
  • Resistant to a wide range of corrosive media.
  • Virtually immune to chlorine ion stress corrosion cracking

Application:
  • Pulp and paper industry
  • Food processing
  • Nuclear Engineering
  • Gas turbine components
  • Chemical industry
  • Aerospace
  • Heat treating industry

Chemical Analysis of Monel K 500 :


Ni + CoCrFeCMnSSiCu
72.0 min14.0-17.06.0-10.0.15 max1.00 max.015 max.50 max.50 max

ASTM Specifications:

Pipe SmlsPipe WeldedTube SmlsTube WeldedSheet/PlateBarForgingFittingWire
B167B517B163B516B168B166B564B366 

Mechanical Properties :

Product FormConditionTensile (ksi).2% Yield (ksi) Elongation (%)Hardness (HRB)
Rod & BarCold-Drawn80-10025-5035-5565-85
Rod & BarHot-Finished80-10030-5035-5565-85
Tube & PipeHot-Finished75-10025-5035*55-
Tube & PipeCold-Drawn80-10025-5035-5588 Max
PlateHot-Rolled80-10530-5035-5565-85
SheetCold-Drawn80-10030-4535-5588 Max

Additional Information:
  • Delivery Time: AS PER REQUIREMENT
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

Request CallBack
Alloy Fastener
Ask For Price

Alloy Fastener

Product Price : Get Latest Price
Product Brochure
Product Details:
SizeAll
TypeFastener
Surface FinishGalvanized
Material GradeAlloy 20
Packaging TypeBox
MaterialStainless Steel

Mahesh Enterprises is India’s one of the leading Fasteners manufacturers & Suppliers in Alloy 20. It is also known as Carpenter 20. It is a nickel-iron-chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulphuric acid. It also contains niobium for stabilization against sensitization and resultant corrosion. Carpenter 20 combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication. Although originally designed for use in sulphuric acid related industries, Alloy 20 is now a popular choice for a wide variety of industries including the chemical, food, pharmaceutical, and plastics industries. In addition, this super alloy is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping.

 

There has long been a debate on whether Carpenter 20 is a stainless steel or a nickel alloy because the nickel content is right on the border of defining it as one way or the other. So, depending on who you talk to this alloy may be referred to as alloy 20 Stainless Steel or as a nickel alloy. Either way it is still great for corrosion resistance.


Characteristics:
  • Excellent general corrosion resistance to sulphuric acid
  • Excellent resistance to chloride stress corrosion cracking
  • Minimal carbide precipitation during welding
  • Excels in resisting corrosion to hot sulphuric acids

 

Chemical Composition, % :

NiFeCrCuMoNb
32.00-38.00Balance19.0-21.03.0-4.02.0-3.08xC-1.0max

CMnPS Si
.07max2.0max.045max.035max1.0max

    Yes! I am Interested
    Request CallBack
    Inconel Fasteners
    Ask For Price

    Inconel Fasteners

    Product Price : Get Latest Price
    Product Details:
    SizeAll
    TypeFastener
    MaterialStainless Steel
    Thread TypeYes
    ShapeCylinderical, Circle, Round
    ColorSilver
    We are the leading Manufacturer of Fasteners from Mumbai also we do customized works.

    Additional Information:
    • Pay Mode Terms: T/T (Bank Transfer)
    Yes! I am Interested
    Request CallBack

    Stainless Steel 304/304 L

    Ask For Price
    Yes! I am Interested

    Explore more products

    X